jareeharden jareeharden
  • 18-04-2021
  • Mathematics
contestada

I need the answer this question hard

I need the answer this question hard class=

Respuesta :

triggeredunicorn
triggeredunicorn triggeredunicorn
  • 18-04-2021

Answer:

option B is the correct answer of this question.

plz mark my answer as brainlist if you find it useful plz .hope this will be helpful to you ☺️.

Answer Link

Otras preguntas

find the value of solid cylinder figure not including cut out: cylinder is 9.7 ft in height, 7 feet in base length, with 4 ft hole cut out.
Write an example of a linear function and one example of a nonlinear function. Use x and y as variables.
Are spheroidized steels considered as composite? If so, what is the dispersed phase a)- No b)- Yes, Chromium Carbides c)- Yes, Iron Carbides d)- Yes, Intermetal
Briefly define open pit method of mineral exploration. please define stepwise
The value of h is usually much lower at the fin tip than it is at the fin base. a)-True b)-False
What is "Double Subscript Notation for Stresses"?
3. The width and length of a rectangle areconsecutive integers. If the perimeter ofthe rectangle is 142 inches, find the widthand length of the rectangle.​
Combined heat and power is also known as______
The _____________ RTN describes the overall effectof instructions on the programmer visible registers Abstract Concrete Absolute Absolute
A hot-water stream at 80 ℃ enters a mixing chamber with a mass flow rate of 0.5 kg/s where it is mixed with a stream of cold water at 20 ℃. If it is desired tha